DIY Chenille Cuties Unicorns: Step-by-Step Craft Guide

By Bright Stripes | Creative DIY & Craft Kits for Kids & Adults | Published: 2026-10-26

Category: How-to Guides

Learn how to make two adorable unicorn bag danglers with the DIY Chenille Cuties Unicorns kit. Step-by-step instructions, common mistakes, and finishing tips included.

Quick Answer

Use the DIY Chenille Cuties Unicorns kit to bend fluffy pipe cleaners into two magical unicorn bag danglers. Follow the step-by-step process below to assemble the body, add accessories, and finish with a keychain.

Why This Kit Works for Young Crafters

The DIY Chenille Cuties Unicorns kit is designed for kids and beginners. The pipe cleaners are extra-fluffy and easy to bend, so little hands can shape them without frustration. The kit includes everything you need—glue, charms, face features, and ball-chain keychains—so you don't have to gather extra supplies.

One thing to keep in mind: the kit makes two unicorns, which is great for siblings or playdates. However, the small accessories like charms and face features can be tricky for very young children, so adult supervision is recommended for the gluing steps.

Step-by-Step Instructions

Unpack and Organize: Open the kit and lay out all the pipe cleaners, accessories, glue, and keychains. Sort the pieces for each unicorn into two piles so you don't mix them up. Check that you have two of each accessory before starting.
Shape the Body: Take one pipe cleaner and bend it into the basic unicorn body shape—usually a loop for the head and a longer section for the body. Follow the included instructions or use the picture as a guide. Common mistake: bending too sharply can kink the pipe cleaner; bend gently and adjust as you go. If the pipe cleaner kinks, gently straighten it and start that bend again.
Add the Horn and Ears: Attach the printed felt horn and ear pieces to the head area. Use a small amount of glue to secure them. Common mistake: using too much glue can make the felt soggy and slow to dry. A tiny dab is enough. Let the glue dry for a minute before moving on to avoid shifting.
Attach the Rainbow Tulle: Wrap or glue the rainbow tulle around the neck area to create the unicorn's mane. Common mistake: wrapping too tightly can distort the body shape. Leave it loose enough to look fluffy. Check that the tulle is evenly distributed around the neck.
Add the Face Features and Charms: Glue on the face features (eyes, cheeks) and attach the charms to the body. Common mistake: placing the eyes too close together can make the unicorn look cross-eyed. Use the picture as a spacing guide. Position the face features before gluing to ensure they look right.
Attach the Keychain and Finish: Thread the ball-chain keychain through the loop on the unicorn's head or body, depending on the design. Make sure it's secure. Common mistake: not checking the keychain attachment before the glue dries—test it while the glue is still wet. Give the glue a few minutes to fully set before hanging the unicorn.

Product Facts

DIY Chenille Cuties- Unicorns: This kit includes extra-fluffy pipe cleaners, tiny accessories like horns, rainbow tulle, and printed felt to create two unicorn bag danglers. You get everything needed to make two complete unicorns, so the project is ready to go right out of the box.
DIY Chenille Cuties- Unicorns